In practice9 min read

Before the quote: which details you need and how to spot bargain hunters

Location, scope, photos, timeframe and, voluntarily, a budget range: which details matter before a quote, and how to fairly handle enquiries that don't fit.

Two hands holding a yellow tape measure horizontally against a light wall with two small drill holes

One call, two sentences: "How much do you charge to paint a bathroom?" You drive over, measure up, write the quote in the evening. Then you never hear back. Maybe the price was too high, maybe your start date was too late, maybe the customer was just comparing. You don't know.

This article is for painters, electricians, plumbing and heating (in German: SHK, Sanitär, Heizung, Klima), gardening, cleaning and other small businesses that write quotes on top of the actual work. It covers two things: which details you need before you write a quote, and how to recognise early and fairly when an enquiry doesn't fit you. We don't recommend any prices here. You know those better.

How enquiries reach you in the first place is covered in the article On site and the phone rings. How to promise and keep callbacks is covered in Organising callbacks.

In short

  • Before a quote you need five details: location, scope, photos, timeframe and, voluntarily, a budget range.
  • Ask for these details with a fixed text, on the phone, by message or through your website.
  • Someone who only looks at the price isn't automatically a bad customer. Comparing is normal. The question is whether you are a good fit.
  • If an enquiry doesn't fit, say so early, politely and with a reason.
  • If you want to charge for a site visit or a cost estimate (in German: Kostenvoranschlag), agree on it beforehand.

The five details before every quote

The more you know beforehand, the easier it is to decide: do I drive over, do I write a quote straight away, or do I decline? These five details are enough for most enquiries. The German consumer advice centre (Verbraucherzentrale) also advises customers to fix the scope, the date of the work and the payment as precisely as possible before placing an order, ideally in writing. So you're not asking for anything unusual.

1. Location. Street, or at least the town and district. That tells you right away whether the journey fits your area. For work inside a building it also helps to know: which floor, is there a lift, where can you park. For a painter with scaffolding or a gardening business with a trailer, that's not a minor detail.

2. Scope. What exactly needs doing, and how much of it? "Paint two rooms, ceiling and walls, with the approximate room size" is a different enquiry from "renovate the flat". Rough measurements are enough at the start. Also ask about the condition: new build, old building, damage, materials already there?

3. Photos. A few photos often say more than a long phone call. Ask for one overview photo of the whole room or area and one or two close-ups of the spot in question. For an electrician, for example, the fuse box; for a heating business, the boiler's rating plate. Ask for photos without people in them.

4. Timeframe. When should the work start, and is there a fixed date by which everything must be finished? If the customer wants next week and you only have time in two months, you save both of you the quote.

5. Budget range, voluntary. Many customers have an idea of what they want to spend. If you know it, you can suggest suitable options or say early on that it won't work that way. But: this is a request, not a requirement. Anyone who doesn't want to name a range doesn't have to. So ask openly, for example: "Do you already have a budget in mind? It's voluntary, but it helps us make suitable suggestions."

On top of that, of course, a name and a way to reach them. For the first step you usually don't need more. Don't ask for things you only need once you have the job.

How to ask without interrogating

The details are only useful if you ask for them the same way every time. Otherwise something keeps going missing. Set up a fixed text that you send by message or email.

A fictional example for a painting business:

Thank you for your enquiry. So we can make you a suitable quote, we need a few details:

  1. Where is the job (town, street)?
  2. What needs doing, and roughly how large is the area?
  3. Two or three photos: one of the whole room, one close up. Please without people in the picture.
  4. By when should it be finished?
  5. Voluntary: do you already have a budget range in mind?

We'll then get back to you by Friday with a quote or a suggested date for a site visit.

The last sentence matters. The customer knows what happens next and by when. It's the same idea as with a callback promise.

Where to use the text:

  • On the phone as a call guide you keep next to you.
  • By message or email, when someone only writes "How much does it cost?".
  • In your voicemail greeting, briefly: "Please tell us your location and what it's about."
  • On your website as an enquiry form with exactly these fields. What such a form can look like in detail is a topic of its own. Just this much here: only ask for what you really need for the first step.

Quote, cost estimate, site visit: who pays?

Here it's worth looking at the law. According to § 632 (3) of the German Civil Code (BGB): "Ein Kostenanschlag ist im Zweifel nicht zu vergüten", meaning a cost estimate is, in case of doubt, not to be paid for. The Verbraucherzentrale adds that tradespeople or service technicians may only charge for a cost estimate if this was expressly agreed beforehand.

For you this means: if you want to charge for an elaborate site visit, a detailed measurement or a detailed cost estimate, say so beforehand. Clearly, with the amount, ideally in writing. And before you drive over, not afterwards.

Whether you do this is your decision. One option: you offset the cost against the job if it goes ahead. Another: you only go for a site visit when the details are complete beforehand. Both help sort out unclear enquiries without putting anyone off.

Note: This section gives an overview and is not legal advice. As of: November 2026.

"Bargain hunters": when an enquiry doesn't fit

First of all: customers are allowed to compare. The Verbraucherzentrale even explicitly advises consumers to get several cost estimates and compare the offers. Anyone who asks for three quotes is doing nothing wrong. By the way, the same text also says: check the content of the quote, not just the price.

By "bargain hunter" (in German: Preisjäger) we mean something else here: enquiries where only the price counts from the start, and process, quality or timing don't matter. That's not a character flaw. It just often doesn't fit a business that relies on quality, advice or fixed processes.

Possible signs that you're not a good fit:

  • Your question text gets no details back, only another "Roughly how much is it?".
  • They want a binding price over the phone, without photos and without a site visit.
  • A site visit is refused, but a detailed quote with every single item priced is wanted.
  • The timeframe is open, and the question about it gets no answer.
  • Discounts come up in the very first conversation, before it's clear what needs doing.

Important: these are signs, not proof. A customer who sends no photos may not have a smartphone. Someone who asks about the price may simply have a tight budget. So: don't judge, ask. A sentence like "Without photos or a site visit I can't give you a reliable price. Feel free to send me the details and I'll get back to you" can clear that up.

And look at your own side too. If your website doesn't say what you do and what you don't, enquiries that don't fit come in more easily. A sentence like "We do interior painting, no facades" sorts things out before the first call.

Declining fairly or pointing elsewhere

An enquiry doesn't fit? Then say so early. A clear no is better for the customer than waiting for weeks for a quote that never comes.

Three building blocks for a fair no:

  1. Say thank you. The customer took the time and thought of you.
  2. Give a reason, short and factual. Not your field, no free date in the requested timeframe, too far away, too small or too large for your business.
  3. Help further if you can. A hint which trade fits better, or when you'll have free dates again.

Fictional examples:

  • "Thank you for your enquiry. Unfortunately we don't do facade work. Your best bet is to ask a business that also does scaffolding."
  • "We don't have a free date before February. If that's too late for you, I understand. Feel free to get in touch if your plans change."
  • "For a price I need the details from my last message. If you'd rather not send them, that's fine. Then unfortunately I can't make you a quote."

No excuses, no blame, no silence.

Checklist: before every quote

  • Decide on five details: location, scope, photos, timeframe, budget range (voluntary).
  • Write a fixed question text and save it as a text snippet on your phone or in your email program.
  • In the question text, say what happens next and by when.
  • Only then decide: quote straight away, site visit or decline.
  • Only charge for a site visit or cost estimate if it was clearly agreed beforehand.
  • Say briefly on your website what you do and what you don't.
  • Decline unsuitable enquiries early: thanks, reason, a pointer if possible.
  • Regularly delete photos and details from enquiries that don't turn into a job.

How we can help

We look with you at the path from the first enquiry to the quote: which details are you regularly missing, where do you ask three times, where do you write quotes into the void? Often a good question text on your phone is enough. If enquiries come in through your website, in the area of Website & visibility we can make clear what you offer and what you don't, and in the area of Automation we can set things up so enquiries reach you in order, with the details you need. If your trade software can already do that, we'll tell you.

In the initial consultation we look together at which details you're missing before a quote and which simple step helps first.

#Angebot#Kundenanfragen#Kostenvoranschlag#Handwerk#Organisation

Sources & further reading

  1. § 632 BGB: Vergütung (Gesetze im Internet) gesetze-im-internet.de
  2. Verbraucherzentrale: Handwerker. Was bei einem Auftrag zu beachten ist verbraucherzentrale.de